ULTRACOAT CERAMIC SET 30 ML

UltraCoat Ceramic Set is a two-component ceramic protection package designed for vehicle exterior surfaces. The system combines:

• UltraCoat One – a SiO₂-based ceramic coating that bonds with paint, wheels, and plastics, providing long-term protection and enhanced gloss.
• UltraCoat Hydro HD – a quartz-based top coat enriched with fluoropolymers that boosts hydrophobicity, slickness, chemical resistance, and overall appearance.

The combination of these two coatings creates a durable protective layer that enhances colour depth, improves surface hardness, reduces the appearance of micro-scratches, and makes vehicle maintenance significantly easier. Protection can last up to 3 years or approximately 40,000 km with proper maintenance.

Kit Contents

• UltraCoat One – 30 ml
• UltraCoat Hydro HD – 30 ml
• Microfiber coating applicator
• UltraCoat Protected stickers
• Service cards

Coverage: Up to 2 medium-sized vehicles.

How to Use

Surface Preparation

• Thoroughly wash and decontaminate the vehicle.
• Polish the paint if necessary.
• Degrease using a panel wipe such as Finest Wipe.

Step 1 – Apply UltraCoat One

• Apply several drops to the applicator.
• Spread over approximately 50 × 50 cm sections using a cross-hatch pattern.
• Wait 1–2 minutes.
• Remove residue with a soft microfiber towel.
• Continue panel by panel.

Step 2 – Apply Hydro HD

• Wait approximately 2 hours after applying One.
• Apply Hydro HD in the same cross-hatch pattern.
• Buff immediately using a clean microfiber towel.
• Continue until the vehicle is completed.

Tips

• Produces exceptional gloss and colour depth.
• Creates a strong self-cleaning hydrophobic effect.
• Protects against UV rays, oxidation, contaminants, and environmental fallout.
• Improves chemical resistance and helps reduce water spot formation.
• Makes washing and drying significantly easier.
• Suitable for paintwork, wheels, and exterior plastic trim.