ULTRACOAT HYDRO HD 30 ML

UltraCoat Hydro HD is an advanced SiO₂-based protective coating developed as a fast and easy alternative to traditional waxes while providing significantly higher durability and performance. It protects paintwork, plastics, and glass, creating a highly hydrophobic surface that repels water, dirt, and contaminants. The coating can be applied as a standalone protection layer or used as a top coat over coatings such as UltraCoat One, enhancing slickness, gloss, and hydrophobic performance.

A unique antistatic effect helps reduce dust accumulation, making vehicle maintenance easier while maintaining a freshly detailed appearance.

How to Use

• Thoroughly wash and decontaminate the vehicle.
• Remove old waxes, sealants, or coatings if necessary.
• Degrease the surface using a panel wipe such as Finest Wipe.
• Apply a few drops onto a coating applicator.
• Spread evenly using a cross-hatch pattern on sections of approximately 40 × 40 cm.
• Immediately buff with a clean, soft microfiber towel.
• For enhanced performance, apply a second layer immediately after the first.
• Allow at least 30 minutes of initial curing and avoid moisture for several hours. Full curing occurs within approximately 24 hours.

Tips

• Can be used on paint, plastic trim, and glass.
• Excellent as a maintenance top coat for ceramic coatings.
• Delivers intense water beading and self-cleaning properties.
• Adds exceptional slickness and depth of gloss.
• Antistatic properties help prevent dust from sticking.
• Easier and faster to apply than traditional waxes.
• Best applied indoors and away from direct sunlight.
• One 30 ml bottle is typically sufficient for approximately 2 medium-sized vehicles.