ULTRACOAT IRON HUNTER 500 ML

UltraCoat Iron Hunter is a ready-to-use iron remover designed for chemical decontamination of paintwork and wheels. Unlike traditional thick gel iron removers, Iron Hunter uses a liquid formula with high viscosity, allowing easy spraying while maintaining long dwell time and slow evaporation. It reacts rapidly with iron particles, producing an intense red-purple colour change that indicates contamination removal.

The pH-neutral formula is safe for paint, alloy wheels, hard waxes, ceramic coatings, and most exterior protective layers, making it suitable for both deep decontamination and regular maintenance washes.

How to Use

• Apply the product directly onto cool paintwork or wheels.
• Allow it to react for several minutes.
• Observe the red/purple colour change as metallic contamination dissolves.
• Agitate with a brush or wash mitt if necessary.
• Rinse thoroughly using a pressure washer.
• Repeat on heavily contaminated surfaces if required.

Tips

• Ideal for removing brake dust and embedded iron particles.
• Suitable for paintwork, wheels, and ceramic-coated vehicles.
• High-viscosity formula increases contact time without excessive dripping.
• Fast reaction and slow drying improve cleaning performance.
• Mint fragrance helps mask the strong odour typically associated with iron removers.
• For maximum effectiveness, apply to a dry surface.
• Do not allow the product to dry on the surface.
• Always use gloves and work on cool surfaces away from direct sunlight.